Douglas Woods Poly B Replacement | Calgary – Case Study #392

Douglas Woods is a southeast Calgary community developed during the early 1990s construction boom when polybutylene piping was standard in new home construction. Urban Piping completed Gordon's whole-home repipe, replacing all original Poly B with modern PEX piping throughout this SE Calgary residence.

Table of Contents

Whole-Home Repiping in Douglas Woods

Gordon had been researching Poly B plumbing for some time before reaching out to Urban Piping. His Douglas Woods home, built during the early 1990s construction boom in southeast Calgary, still had its original polybutylene piping throughout. After learning about the risks of Poly B failures and the potential for costly water damage, Gordon decided to take a proactive approach and repipe his entire home before any problems could develop. Gordon knew that waiting for a plumbing emergency to occur could lead to extensive damage and high repair costs. Similar to this Chestermere case study, he understood that taking preventative measures could save him both time and money in the long run. Confident in his decision, Gordon scheduled an appointment with Urban Piping to discuss the repiping options available for his home.

This was a substantial project. The Urban Piping team arrived on October 23rd and immediately began comprehensive site preparation. High-impact Ram Board protected all tile and hardwood surfaces, while professional-grade carpet liner covered every traffic area. Light plastic sheeting was draped over furniture in the work zones, and—given the scope of this particular job—additional plastic barriers were hung from the ceilings to isolate the work areas and prevent dust from spreading throughout the home. This extra containment step reflects the attention to detail that larger projects require.

The repiping work replaced all polybutylene lines with Rehau color-coded Class A PEX piping featuring UV barrier protection. Every fixture received new Dahl shut-off valves for both hot and cold supply lines, along with braided distribution hoses for faucets and toilets. Brass exterior garden faucets and a city-appropriate laundry box completed the plumbing upgrades. A 12×7 disposal bin sat in the driveway throughout the project to handle the volume of old materials and debris—a clear indicator of the project’s scale.

With pipes running throughout the home, the team cut access points in the drywall on multiple levels and in numerous locations. Once the new piping was installed and pressure-tested, the drywall repair phase began. This included boarding, mudding, taping, and texture matching to blend seamlessly with the existing ceilings and walls. Paint matching followed to ensure repaired areas disappeared into the surrounding surfaces.

A professional-grade four-stage HEPA air scrubber ran throughout the project to maintain air quality and control the considerable dust generated during drywall work. The project wrapped up on November 3rd with a thorough cleanup—all prep materials and debris removed, followed by vacuuming and wiping down the entire home. From start to finish, the project took approximately twelve days.

For homeowners exploring Poly B Replacement Calgary options, Gordon’s project demonstrates what a comprehensive whole-home repipe looks like when the scope is significant: meticulous planning, thorough containment, quality materials, and skilled execution at every stage. Additionally, homeowners should consider the long-term impact of Poly B plumbing on their property value. For those contemplating a sale, seeking info on selling a house with Poly B in Calgary can provide invaluable insights into potential buyer concerns and necessary disclosures. Addressing these issues proactively can significantly enhance market appeal and streamline the selling process.


Douglas Woods Homes and Poly B Plumbing

Douglas Woods is a well-established residential enclave within the broader Douglasdale/Glen community in southeast Calgary. The area was established in 1986, with most homes in Douglas Woods constructed between the late 1980s and early 1990s. This development timeline places Douglas Woods squarely within the peak years of polybutylene pipe installation in Canadian residential construction, which ran from approximately 1985 to 1997.

The neighborhood features predominantly single-family detached homes, many of which are generously sized two-story designs. Typical Douglas Woods homes range from 1,800 to 2,300 square feet above grade, with four to five bedrooms and three to four bathrooms. Many properties also include developed basements, adding significant living space. The community’s mature landscaping and established character reflect over three decades of residential history.

Given when these homes were built, a substantial number of Douglas Woods properties were originally plumbed with polybutylene piping. Homeowners in the area—particularly those whose homes have never had plumbing upgrades—should be aware that Poly B may still be present behind their walls and under their floors. The gray or blue plastic pipes are often visible in utility areas, under sinks, or near water heaters.


Why Douglas Woods Homes Need Experienced Contractors

Douglas Woods homes present several challenges that require experienced contractors to navigate successfully. The larger floor plans common in this neighborhood mean more linear feet of piping to replace, more access points to cut, and more drywall to repair. This isn’t a job where shortcuts can be taken without consequences.

Two-story construction requires coordinating work across multiple levels, with pipes running vertically through floor assemblies and interior walls. Accessing these runs means cutting into drywall on both the main and upper floors, then ensuring repairs blend seamlessly on every level. The prevalence of developed basements adds another layer—finished basement ceilings often need to be opened to access horizontal pipe runs, requiring additional drywall work and texture matching.

Many Douglas Woods homes feature textured ceilings, including the knockdown and stipple finishes popular during the late 1980s and early 1990s. Matching these textures after drywall repair is a specialized skill. Poor texture matching leaves obvious patches that detract from the home’s appearance and can affect resale value. Urban Piping’s team includes experienced drywall professionals who understand how to replicate these period-specific finishes.

The larger scope of these projects also demands proper containment. Hanging plastic barriers from ceilings to isolate work zones prevents dust from migrating throughout the home—an essential step when working in multiple rooms over an extended timeline. Professional-grade air scrubbers running continuously throughout the project maintain indoor air quality despite the significant drywall dust generated.

Hard-to-reach areas are common in homes of this vintage. Pipes frequently run behind tiled tub surrounds, through cramped vanity cabinets, and along exterior walls where outdoor faucets connect. Experienced contractors anticipate these challenges and plan their approach accordingly, minimizing unnecessary damage while ensuring complete access to all piping.

This is why choosing a qualified contractor matters. Urban Piping brings the experience, equipment, and skilled trades necessary to handle the complexities of larger southeast Calgary homes like those in Douglas Woods—delivering results that look as good as they perform.


Douglas Woods Project Photos

Urban Piping documents the work completed on every job site. Below are the project photos from Gordon’s Douglas Woods repiping project.

Poly B Estimate

MORE POLY B REPLACEMENT CASE STUDIES

Vancouver
corey@getxmedia.com

Coquitlam Poly B Replacement | Vancouver – Case Study #432

Coquitlam is a Tri-Cities community in Metro Vancouver where homeowners proactively address Poly B plumbing risks. Urban Piping completed Steve’s whole-home repipe after he decided to act before potential leaks, water damage, or insurance complications.

Edmonton
corey@getxmedia.com

Spruce Grove Poly B Replacement | Edmonton – Case Study #357

Spruce Grove is a community west of Edmonton where rural acreage properties contain Poly B plumbing from original construction. Urban Piping completed Sharon’s whole-home repipe on her acreage property, replacing all polybutylene with modern PEX piping.

Vancouver
corey@getxmedia.com

Delta Repipe Poly B Replacement | Ladner – Case Study #464

Delta is a Metro Vancouver municipality where Ladner homeowners take proactive action on Poly B plumbing. Urban Piping completed Roslyn’s whole-home repipe after she learned about the risks of aging polybutylene pipes including leaks, water damage, and insurance complications.

Vancouver
corey@getxmedia.com

Delta Poly B Replacement | Ladner – Case Study #638

Delta is a Metro Vancouver municipality where Ladner homeowners are proactively addressing Poly B plumbing. Urban Piping completed Romel’s whole-home repipe before any leaks or insurance issues arose, replacing all polybutylene with modern PEX piping.

Edmonton
corey@getxmedia.com

Sherwood Park Poly B Replacement | Edmonton – Case Study #741

Sherwood Park is Edmonton’s largest suburb where proactive homeowners address Poly B plumbing before failures occur. Urban Piping completed Paul’s whole-home repipe, replacing polybutylene installed during original construction with modern PEX piping.

Calgary
corey@getxmedia.com

Chestermere Poly B Replacement | Calgary – Case Study #529

Chestermere is a lakeside community east of Calgary where acreage properties contain Poly B plumbing from original construction. Urban Piping completed Patrick’s whole-home repipe on his acreage property, addressing polybutylene concerns before potential leaks or insurance complications.

Scroll to Top