Good low flow toilets can be crucial to the comfort of everyone at home and public places that is why the design of a toilet is significant to the experience everyone had after using the toilet. The design of toilets have evolved from the traditional type that uses several liters of water to flush to a more efficient one. The modern design of the toilet has several benefits to offer every homeowner or property owner. Before going further, a quick look about the toilet is needful.
What Is A Low Flow Toilet?
A low flow toilet is a flush toilet specifically designed to use significantly less water than a full-flush toilet. The two primary functions of all toilets are to take water from the toilet tank and discharge wastewater. A low flow toilet was designed to reduce the volume of water used to flush excreta down the drains (Understand Pressure vs Volume).
Low flow toilets are designed to replace the traditional toilets in order to achieve a significant reduction in the volume of water used to flush waste into the septic tank. The cistern and siphon of low flow toilets are specially designed to remove feces and excreta with less water. In most cases, they have a dual flush system where one is designed for urine and the other for feces. The one for urine uses less water than the one intended for flushing feces.
Purpose of Low Flow Toilet Design
The primary reason the design of a low flow toilet is water consumption. Many people do not know how much water toilets consume. After the outdoor irritation in a residential building, the toilet is the next that consumes the most water. At least 38% of water used in any home accounts for flushing the toilet.
A law was made in 1992 mandating only the low flow or low flush toilets to be sold in the United States. By low flow, it is intended that no more than 6 liters of water should be used per flush. Prior to that time, traditional toilets used from 13.24 to 26.5 liters per flush.
Most older homes have yet to install low flow toilets although government and nonprofit agencies are encouraging homeowners to change the old toilets to low flow models. As an incentive, some cities and municipal water organizations offer rebates for purchasing a low flow toilet.
Types of Low Flow Toilets
There are three designs of low flow toilets:
1. Gravity-fed Tank
This happens to the most common type of toilet on the market. The design makes use of the weight and volume of the water in the tank to flush waste, and it is the most common type of toilet on the market. It is relatively affordable.
2. Two-button Flush
This is a gravity-fed tank but with two volumes of water – a half flush (3 liters) for urine and a full flush (6 liters) for excreta.
3. Power-assist or Pressure-assisted
This design uses compressed air to force the water to flush the waste. This design does not have freestanding water in the bowl. The pressure tank holds the water in the toilet tank. The system needs a powerful flush. This design is more expensive and makes more noise than the other types.
Benefits of a Low Flow Toilet
One may be prompted to ask what the benefits of low flow toilets could be. Low flow toilets have several benefits to homeowners, our environment, and wallet, which justify the primary purpose of designing these innovative toilets.
Here are the benefits of a low flow toilet:
1. Reduction in Water Consumption
Over the years after their introduction, low flow toilets are a smart addition to any home either for saving money or low-impact living. With low flow toilets, a family of four will be able to save up to 83,280 liters of water per year. The new toilet uses 6 liters of water compared to the standard toilet which uses from 13 to 26 liters of water per flush.
2. Environmentally Friendly
The new toilets will help to preserve the environment as less water is used per flush. If the entire country upgrades to the new toilets, a significant volume of groundwater will be protected from depletion and possible contamination. The toilets will help to reduce the pressure on the groundwater being used to flush the toilets. The resource consumption will be reduced.
3. Easy-to-use and Clean
The new toilets, regardless of the upgrade, are simple to use and clean. The difference between low flow toilets and the standard toilets is in the internal mechanism. So, there is no complexity involved in using or cleaning the new toilets.
4. Lower Water Bill
This is the most obvious reason for using low flow toilets. It uses a small volume of water to flush every time per flush, which will result in high savings on the water bill. Imagine a family of four saving about 83,280 liters of water per year, which will translate to hundreds of dollars in the long run.
5. Increased Home Value
Installing low flow toilets, like other improvement projects, will undoubtedly increase the resale value of a property. It may not seem a big deal, but when valuing the building, low flow toilet will increase the value of the home significantly.
6. Modern Technology
Installing low flow toilets gives you the opportunity of incorporating the latest technology into your home. This is not like other types of technology that will become outdated very soon. The plumbing and low flow toilets will remain relevant for a long time, and that will ensure that your investment is a smart one.
7. Lower Water Consumption, Higher Performance
The use of low flow toilets will cause a significant reduction in water consumption in your home without creating a corresponding decrease in performance. The new designs are efficient and deliver an enhanced experience to users using a small volume of water.
Change the toilets in your home to low flow toilets and you are assured of recouping your investment as soon as possible, reduced water bill, enhanced home value, and upgrading to the modern technology.
- How to Know when to Replace a Toilet?
- How to Unclog a Toilet and When to Call for Drain Cleaning Services
- Costly Drain Cleaning Prevention: Worst Things to Flush Down your Drains
- How to Clean your Drains Naturally: Drain Cleaning Alternatives
- Is Drain Maintenance Worth it?