Quick Facts about Hard Water and Water Softeners you Should Know
Hard water brings about so many problems in the house so choosing the best water softener can be the remedy to some of these problems. For example, hard water makes films develop on the shower door, forms spots on the glassware, creates plumbing issues and makes water using appliances inefficient. A water softener can help you fix this situation. This read will guide you on all you need to understand what to look for when looking to install a water softener in your home.
Know about Water Softener Systems
- You can determine water hardness by buying a water testing kit or calling up your city water provider.
- The term “the grain capacity of a water softener” means that the maximum number of hard water grains that the unit can remove before regeneration.
- Most state systems that supply water measure water hardness in parts per million, liters or milligrams.
- For you to know how much water softener salt you need at home, you will have to multiply the gallons of water used on a daily basis with the number of people at home. The average amount of water used per person is eighty gallons. If you get the actual amount, you will know how much water hardness you will need to remove on a daily basis and this will impact the amount of softening salt that you will have to use on a daily basis. Make sure that you buy a water softener that can handle the hardness. Households with four people need an average of 33,000 grains per unit.
- The water softener has a resin bed. As time goes by, this resin bed is coated with hard materials that make the softener shift to regeneration mode. during this period, the tanks salt mixes with the water to remove the hardness from the resin bed. When the process is complete, the unit can provide a steady stream of soft water for use at your home.
- The best salt to use is a nugget or clean pellet salt. This does not mean that you can solely use this salt. Other salts are accessible and available for special uses.
- The recharge water from the water softener does not cause any harm to the septic system.
- Each recharge requires about as much water as you would use to do your laundry
- The electricity used by a water softener is as minimal as that is used by an alarm clock.
Take note that salt water needs to be softened to reduce a lot of home issues related to water. Most people fail to soften the cold water from their taps making it difficult to wash or even cook. This is because hard water takes a lot of soap to lather up and also has a higher boiling point making it more time consuming to cook. People who are on a medically recommended sodium diet need to consult their doctors and make sure that the softener is a healthy addition to their lifestyle.
Requirements for Installing a Water Softener
- To install a water softener, you will need to use sufficient tubing that connects the softener to the plumbing system and a national pipe thread taper (NPT) female connector that is an inch long. Moreover, you could use cross-linked polyethylene (PEX), steel, chlorinated polyvinyl chloride (CPVC), polyvinyl chloride (PVC), and copper plumbing. Each of the types mentioned here may need a different tool to install it.
- A drain is an essential aspect of the recharge or regeneration process. If your drain is within the 10 feet range, then you could just buy that. However, if it is more, then you need to be ready to buy more half an inch tubing to allow it to cover the entire distance. Make sure that the drain is less or at most thirty feet from the softener. Moreover, the drain line needs to be elevated less than eight feet from the floor.
- The transformer should be connected to a 110-volt continuous live outlet. The unit has a sufficient length power cord.
Most households struggle with hard water ruining their skin, utensils, clothes, hair, and water-using appliances. Do you use rainwater? Rainwater is soft, but when it gets into contact with soil and rock then it gets magnesium and calcium turning the soft water hard. The more the dissolved magnesium and calcium, the more the water becomes hard.
Common Effects of Hard Water Include:
- Clogging pipes
- The build-up that stains bathtubs, shower, and faucets making it look crusty
- Mineral deposits and scales
- Stained clothes
- Using up too much detergent when washing clothes and utensils
- Dried up and cracking skin
- Hair breakage and dryness
- The short lifespan of water appliances
- Expensive bills
Read more about the Harmful Effects of Hard Water on children.
If you purchase a home in an area that supplies hard water, then you should invest in the installation of a water softener that is high quality. Save your time and money by selecting the best water softener for your home. Selecting the water softener is not as easy as it sounds. Going to a store and selecting the most expensive and latest version of the softener does not guarantee that it will serve you well.
There is a criterion for this. You have to consider a lot when choosing the best water softener for your specific needs. The following are some of the factors you need to consider.
- Size: you need to learn how hard your water is. This metric will help you choose the most suitable water softener to handle your issue. This guide has helped you factor this in as was explained above.
- The hardness of the water: This is a crucial factor. It will help you know how much energy you will use to run the transformer.
To make sure that your water remains soft the water softener needs to regenerate. It is possible to select a system that regenerates automatically with a timer, or necessitate manual regeneration. Setting your unit to be able to regenerate automatically at a specific time will ensure that it is taking place and you don’t need to remind yourself to make it happen.
More on water softeners…